The blow off of exhaust steam vapor in the degassing process causes a continuous steam loss of 0.2-0.5%. This has always been an issue without a good solution in place.
The OxySteam Regulation System from Centec monitors and controls the steam exhaust by an Oxygen sensor and can be connected to an automated shut-off valve:
Hydrogen is transferred to storage and into fuel cell vehicles at very high pressures, high velocities and at varying temperatures. Hydrogen distribution and dispensing must be both accurate, reliable and usable for end user point-of-sale billing.
Rheonik is the first Coriolis Flowmeter manufacturer who obtained a custody transfer approval for a broad range of mass flowmeters for mobile and stationary hydrogen applications up to 1070 bar according to MID MI002 / OIML R137.
The demand for energy continues to increase over time and power plant operators are constantly looking for ways to improve efficiency and output. As Coriolis meters can be used for both liquid and gas flows, they are a natural choice for installation in a great many services within a power plant. With a wide turndown capability and extremely low cost of ownership, Rheonik Coriolis meters offer a measurement flexibility that translates into real bottom line savings.
Biogas measurement provides gas quantity output data, detects the efficiency of a fermentation tank, controls combustion efficiency of the boiler and monitors greenhouse gas emission (CH4 and CO2).
Raw Biogas is usually measured with a low flow rate and pressure of 50-60 mbar and an ambient temperature rising to 50°C after fermentation. Water-saturated biogas can cause 5-6 vol % liquid water in the pipe after cooling down. Particles can cause clogging. Water vapor and H2S forms a corrosive acid. Backflow and scaling of bacteria may appear. Hazardous area certification is required.
OXYTRANS/OXYSTEAM is a very precise, optical oxygen sensor from Centec, Germany to continuously monitor dissolved oxygen (O2) in liquids and gases for:
Schmierer Diaphragm PG have 4 advantages to overcome the limitations of the commonly used Bourdon Tube technology: low pressure - overload protection - aggressive & high viscosity media applications.
The new Liebherr Litronic WMS II Rod Sensor P45-GD for precise water concept/moisture determination in liquids with pressure and temperature measurement. Running process monitoring of
in maritime industries, refineries, oil platforms, pipelines and chemical applications in Ex protected environments.
Multi functional handheld unit with data logger for measuring flow rate, flow velocity, temperature, pressure and other variables in explosive atmospheres
Temperature sensors (TC, RTD) - certified flameproof and intrinsically safe solutions for hazardous areas - wireless solutions
"Limatherm Sensor" is an European manufacturer of all types of temperature sensors:
Many municipal sewage plants apply the activated sludge process where sludge aeration air is being pumped into aeration basins, speeding up the degradation process. To increase the plant’s energy efficiency flow velocity should be measured in order to calculate (mass) flow rate.