Ensim ELG magnetic by-pass level indicators measure the liquid level by a float sensor with a magnet that turns the flaps on an indicating rail (top, bottom or side assembly).

• clear visual monitoring and control
  
• easy installation and maintenance
  
• No electrical power needed.
  
• Versions for high pressure (100 bar), temperature (350°C), aggressive media (PTFE lining)
  
• Different transmitter and limit switch alarm options

As Regional Business Partner, Schmierer SEA has been successfully introducing Kirchner Flow Meter Instruments to Applications in the Water, Waste Water, Palm Oil and Chemical Industries. The know-how of Kirchner specialists competence, experience and years of expertise are the foundations of the Kirchner success story.

• Wide range of products
  
• Specialized product how know with years of experience and expertise
  
• Customized solutions
  
• Certified quality Management, (PED, IECEx/ATEX, VDS)
  
• Short and reliable delivery cycles

Many municipal sewage plants apply the activated sludge process where sludge aeration air is being pumped into aeration basins, speeding up the degradation process. To increase the plant’s energy efficiency flow velocity should be measured in order to calculate (mass) flow rate.

Centec Germany offers different process systems for water treatment:

• Media filtration with pressurized filters
• Ultra filtration with UV membranes
• Reverse Osmosis
• Activated Carbon filtration
• Water Softening, Demineralization, Deaeration, CIP, etc.

EFS Flow switches from Ensim detect if there is liquid flow in pipes. They can be mounted horizontally or vertically. The set switch value can be adjusted by rotating the washer inside the body.

DP Orifice Plate Flowmeters from Kirchner Germany are manufactured with a wide variety of nominal widths for water, air, transparent and non-transparent liquids and gases and non-conductive fluids (mineral oils, demineralised water). 

• Simple operation, no moving parts, wear-free
• Horizontal and vertical installation - between flanges - int. or ext. threads - pipe union
• Pipe size from DN 40 to DN 200
• Flow range: air 0.5 - 4000 m3/h, water 0.05 - 735 m3/h
• Diff.Pressure: air: 5 - 1000 mbar, water: 100 - 1000 mbar
• Accuracy 2,5% of full-scale range
• Calibration acc. to customer specification

• Mounted between flanged or pipe unions (treaded)
  
• protective tube – customized scales specific to the medium
  
• For liquids, gases, aggressive, corrosive media
  
• Limit switches or linear position sensor

Flow measurement of Biogas has faced huge problems due to high humidity, condensation, particles, varying compositions, aggressive and explosive media and marginally low air flow.

The Hoentzsch Vortex VA Flowmeter offers an accurate measurement solution for the Biogas environment:

• starting from very low gas flow velocity (0.4 m/s)
• measuring dynamics (turndown) 1:100
• largely insensitive to condensation and particle deposits
• almost no cleaning and servicing necessary
• accurate measurement with variable gas compositions
• low pressure drop, no moving parts
• SIL and  Ex-proof certifications available

The Kirchner Flap Type Flow Meters are used for large flow rates in different types of process media: water, air, liquids, gases, non-conductive fluids (mineral oils, alkalis, acids), high viscous liquids (slurries) and fluids or liquids with a high content of solidifying particles.The primary measuring element of the flow meters is a flap, which is deflected by the flow of the medium. The deflection angle is a direct indication of the flow.

Advantages

• easy to install, low maintenance
• largely independent of viscosity
• wide choice of material
• explosion proof design
• opt. limit switch or analog 4-20mA output

The devices are used in water and waste water treatment plants, power stations, chemical and oleo-chemical factories, monitoring cooling and heating (furnace) systems, gravel extraction, etc.

 KLA Type Flap Flowmeter

In the standard KLA version a magnet directly transfers the flap movement to an externally mounted pointer that indicates the flow quantity on a powder coated aluminium disk.

In the KLA-GS version the quantity is directly indicated by the flap. The flap-type flow meter is equipped with hard glass screens at the front and the back which provides a direct visual display.

• suitable for slurry liquids, water, oil, suspensions, robust construction
• inidication by magnet or directly by glass
• flow direction: horizontal
• low pressure loss
• NR lining for alkalis and acids
• pipe size: DN 15 - 200
• flow up to 300 m³/h

download KLA datasheet

KFS Type Flap Flowmeter

The 50 mm thick ring features a half-round plate that is fastened to a rotating spring-loaded spindle.
The angle between flap and ring changes according to the rate of flow, and a breakaway-proof magnetic coupling transfers the movement to an external pointer

• suitable for big pipes with water, acids, alkaline solutions and gases
• spring loaded flap connected to a 50mm ring
• flow direction: horizontal, top-bottom
• pipe size: DN 25 - 600
• flow up to 1650 m³/h (air 5000m³/h) 

download KFS datasheet

The Kirchner tank level indicators NA and NA-V4A are suitable water, oil, alkalis or acids in aggressive environments. Each device contains a measuring tube made of borosilicate glass, stainless steel connection tube and a media specific float.