Ensim ECAP capacitive level transmitters measure

• conductive liquid
• low conductive liquid
• granulated materials with solid particle
• adhesive and acid/base liquids
  

Full-empty calibration can be performed easily and safely. Different designs and materials for special industrial solutions. CE certified - explosion proof models available

Diaphragm pressure gauges with open measuring flange are especially well suited in rough conditions with viscous, crystallizing and mediums that carry solid particles. Diaphragm pressure gauges can be easily protected against overpressure.Schmierer Germany has introduced a specialized PTFE Xylan coated Diaphragm Seals for long-term protection against corrosion and chemicals in the Mineral Oil and Chemical Sector.

• Gas and liquid flow - VA float principle
  
• stainless steel VA w. PTFE lining or fully PP/PVC
  
• Low Pressure Loss
  
• Indication via Magnetic Coupling
  
• Individually calibrated - medium specific scale
  
• Accuracy: ±1.6%

Limatherm Protection Tubes and Thermowells for

• high pressure
• heat resistant and creep resistant steel tubes
• ceramic and special tubes
• threaded tubes or suitable for welding
• different mounting connections

Limatherm provides fully explosion proof solutions for housing, sensors and protection tubes.

The Kirchner Flap Type Flow Meters are used for large flow rates in different types of process media: water, air, liquids, gases, non-conductive fluids (mineral oils, alkalis, acids), high viscous liquids (slurries) and fluids or liquids with a high content of solidifying particles.The primary measuring element of the flow meters is a flap, which is deflected by the flow of the medium. The deflection angle is a direct indication of the flow.

Advantages

• easy to install, low maintenance
• largely independent of viscosity
• wide choice of material
• explosion proof design
• opt. limit switch or analog 4-20mA output

The devices are used in water and waste water treatment plants, power stations, chemical and oleo-chemical factories, monitoring cooling and heating (furnace) systems, gravel extraction, etc.

 KLA Type Flap Flowmeter

In the standard KLA version a magnet directly transfers the flap movement to an externally mounted pointer that indicates the flow quantity on a powder coated aluminium disk.

In the KLA-GS version the quantity is directly indicated by the flap. The flap-type flow meter is equipped with hard glass screens at the front and the back which provides a direct visual display.

• suitable for slurry liquids, water, oil, suspensions, robust construction
• inidication by magnet or directly by glass
• flow direction: horizontal
• low pressure loss
• NR lining for alkalis and acids
• pipe size: DN 15 - 200
• flow up to 300 m³/h

download KLA datasheet

KFS Type Flap Flowmeter

The 50 mm thick ring features a half-round plate that is fastened to a rotating spring-loaded spindle.
The angle between flap and ring changes according to the rate of flow, and a breakaway-proof magnetic coupling transfers the movement to an external pointer

• suitable for big pipes with water, acids, alkaline solutions and gases
• spring loaded flap connected to a 50mm ring
• flow direction: horizontal, top-bottom
• pipe size: DN 25 - 600
• flow up to 1650 m³/h (air 5000m³/h) 

download KFS datasheet

The Kirchner tank level indicators NA and NA-V4A are suitable water, oil, alkalis or acids in aggressive environments. Each device contains a measuring tube made of borosilicate glass, stainless steel connection tube and a media specific float.

 Level control for solids and liquids in explosion proof environments in tanks, Ex and CE certified

• Capacitance
• Conductivity
• Float: top- and sidemounted
• Rotary Paddle, Vibration Rod
  

Limatherm Temperature Sensors for aggressive liquids and gases in the chemical and petrochemical sector. Sensor sheaths with

• heat resistant borosilicate SIMAX glass for longtem use in vapour, acids, alkalis and salts
• ceramics SILIT SK - max. temp 1350ºC - high resistance to thermal shock - hardness: 9 acc. to Mohs - porosity: 0% - high abrasion resistance - for acids, ammonia
  

The Kirchner Bypass Flow Meters DST for water, aggressive media, air and gas are used for large flow rates. Easy installation of the orifice plate in any position, the scale is specific to the liquid, wide choice of materials, no el. power required.