The MultiMixer is used for the continuous mixing of several streams of liquid products, e.g. deaerated water, syrup and flavours. Since the number of blending channels can be adapted to individual needs, the skid provides a high degree of flexibility for the production of different products.

The additive dosing system ADoS is used for dosing of ingredients such as vitamins, flavours and colours directly into the main product stream. The compact skid provides a high degree of flexibility for the production of different products.

Dissolved oxygen has adverse impact on flavour stability and shelf life. The deaerations system DeGaS Hot or Cold removes O₂ from water that is used for the production of soft drinks and mineral water. For hot deaeration, the water is heated and disinfected at the same time, Cold deaeration is performed at ambient temperature.

By flash pasteurization harmful microorganisms in soft drinks and mineral water are killed with the aim of improving microbiological stability and shelf life of the product. Flash pasteurization is a well-established and cost-effective process in beverage industry.

The Limatherm TTJU-45 or TTKU-45 rubber mix temperature sensor is mounted at the rubber mix door. A special narrowed tip enhances the sensor reaction time to temperature change. The tip is covered with a protective layer that increases abrasion resistance.A flexible,mineral insulated measuring insert is included inside the Thermowell. It can be replaced without the need to disassemble the whole sensor.

Biogas measurement provides gas quantity output data, detects the efficiency of a fermentation tank, controls combustion efficiency of the boiler and monitors greenhouse gas emission (CH4 and CO2).

Raw Biogas is usually measured with a low flow rate and pressure of 50-60 mbar and an ambient temperature rising to 50°C after fermentation. Water-saturated biogas can cause 5-6 vol % liquid water in the pipe after cooling down. Particles can cause clogging. Water vapor and H2S forms a corrosive acid. Backflow and scaling of bacteria may appear. Hazardous area certification is required.

In coating facilities for beverage cans, cars, truck bodies, etc. air flow velocity needs to be measured accurately at different points:

• laminar flow has to be ensured in the spray booth to get optimal results and
• the exhaust air in the coating booth and the chamber kiln have to be monitored for safety and environmental reasons.
  

Diaphragm seals are used to protect pressure instruments from corrosive, viscous, clogging or hot process media and safeguard highly hygienic and ultra pure liquids from contamination.The seals and membranes are customized for a variety of applications with different materials, coatings and linings, mounting and connection types.

OXYTRANS/OXYSTEAM is a very precise, optical oxygen sensor from Centec, Germany to continuously monitor dissolved oxygen (O2) in liquids and gases for:

• steam boiler water degassing to avoid corrosion
• boiler feed water
• protective atmospheres
• deaerated water, soft drinks, wort
• liquid food and dairy products (flavor stability, shelf life)

The robust compact sensor series MK from Mueller IE is designed for low price segments in exceptionally rough environments: 

• robust & resistant: stainless steel 316SS (1.4571) with IP67 protection
  
• compact, small space construction
• all common process and plug connections (PBT GF30): MIL, M12x1, cable, AMP, Deutsch
  
• 2 wire current loop, 3 wire versions
  
• temperature, level, flow, differential pressure, vibrations
• Industry 4.0: CanOpen, Modbus, Profibus, IO link, HART
• Marine, F&B, HVAC, engines, hydraulics, customized solutions
• made in Germany - IECEx, HART, GL certifications