The Kirchner MSKW limit switch are used for remote monitoring of measuring limits in variable area flow meters with borosilicate glass tubes. The reed switch is actuated by a magnet installed in the float to switch contacts.

• changeover, normally closed or open model options
• easy to adjust over the complete measuring range
• fiberglass-reinforced polyamide or stainless steel housing
• no power supply needed
• for use in explosive areas

The hook-in radio load cell MFWZ was specifically developed to measure cable forces and hooked crane- / lift weighing applications. Even with compact dimensions and low weight, the device is highly accurate. With a robust design, the MFWZ is also suitable for rough environmental conditions.

Schmierer Diaphragm PG have 4 advantages to overcome the limitations of the commonly used Bourdon Tube technology: low pressure - overload protection - aggressive & high viscosity media applications.

The DL-ToolBox 4.0 from Mülller IE is the suitable tool for remote monitoring of gensets and plants. Using a web app and software, machine data is digitised and monitored, thereby reducing operating and maintenance costs. Remote diagnosis is possible using intuitive evaluation software on smartphone, PC and data cloud.

IO Link provides a cost-effective bi-directional point to point data transmission between sensor and control systems with additional sensor and transfer data (error, diagnostic, status messages) IoT benefits for improved maintenance, reconfiguration and reduced downtimes. Standard 3 wire cables connect to the Master IO link device which communicates through any Field Bus technology to the control system. IO sensors do not require expensive HART or IP features.

The new Liebherr Litronic WMS II Rod Sensor P45-GD for precise water concept/moisture determination in liquids with pressure and temperature measurement. Running process monitoring of

• Oil, crude oil, diesel, biodiesel, hardening oil
• Coolants, Paints, lacquers, solvents
• Wax, resin, emulsions, suspensions

in maritime industries, refineries, oil platforms, pipelines and chemical applications in Ex protected environments.

Multi functional handheld unit with data logger for measuring flow rate, flow velocity, temperature, pressure and other variables in explosive atmospheres

Kirchner Germany now offers the certified KFS EM Ex Flap Type Flow Meter for H2O, acids, alkaline solutions and gases in explosion proof design:

• product specific scale and calibration, spring loaded
  
• intrinsically safe Exia or flameproof Exdb design
• local display with limit switch or 4-20 mA output
• largely independent of viscosity, low maintenance

The Food & Beverage, Dairy and Pharmaceutical Sector requires sanitary solutions for a wide range of process applications for storage, processing and cleaning, (brewing, cooling, bottling, canning, emulsification, fermentation, pasteurization, baking, smoking, steaming, CIP, autoclaving, etc.). Certain processes require shock resistance, quick response, tri-clamping, high purity, etc.)

Limatherm in Poland offers customized temperature solutions with clamping tube connections, stainless steel connection heads, thermowell options, autoclave probes and PZH Polish National Institute of Hygiene Attestation.

Modular universal loadcells MULC from Mueller IE - the weighing and force technology where tractive or compressive forces in crane systems, loading cranes, cabinets and control units have to be observed for safety reasons: