Fully graphic TFT digital displays:

• triple display or universal input with 2 switching points
• 96x48 mm, 4 digits, IP65
  
• universal input: voltage, current, PT100(0), TC, frequency, rotational speed, counter
• selectable measuring/background colors: red, green, white, black orange
• USB port for PM tool configuration kit

The  alternative to PLCs to realize comprehensive solutions for the control, regulation and visualization of processes up to evalution.

• Programming with function blocks
• Drag & Drop
• Reducing the programming effort
• PLC programming not required
• High time saving compared to PLC programming

The MultiMixer is used for the continuous mixing of several streams of liquid products, e.g. deaerated water, syrup and flavours. Since the number of blending channels can be adapted to individual needs, the skid provides a high degree of flexibility for the production of different products.

The additive dosing system ADoS is used for dosing of ingredients such as vitamins, flavours and colours directly into the main product stream. The compact skid provides a high degree of flexibility for the production of different products.

Dissolved oxygen has adverse impact on flavour stability and shelf life. The deaerations system DeGaS Hot or Cold removes O₂ from water that is used for the production of soft drinks and mineral water. For hot deaeration, the water is heated and disinfected at the same time, Cold deaeration is performed at ambient temperature.

By flash pasteurization harmful microorganisms in soft drinks and mineral water are killed with the aim of improving microbiological stability and shelf life of the product. Flash pasteurization is a well-established and cost-effective process in beverage industry.

Diaphragm seals are used to protect pressure instruments from corrosive, viscous, clogging or hot process media and safeguard highly hygienic and ultra pure liquids from contamination.The seals and membranes are customized for a variety of applications with different materials, coatings and linings, mounting and connection types.

OXYTRANS/OXYSTEAM is a very precise, optical oxygen sensor from Centec, Germany to continuously monitor dissolved oxygen (O2) in liquids and gases for:

• steam boiler water degassing to avoid corrosion
• boiler feed water
• protective atmospheres
• deaerated water, soft drinks, wort
• liquid food and dairy products (flavor stability, shelf life)

The Kirchner MSKW limit switch are used for remote monitoring of measuring limits in variable area flow meters with borosilicate glass tubes. The reed switch is actuated by a magnet installed in the float to switch contacts.

• changeover, normally closed or open model options
• easy to adjust over the complete measuring range
• fiberglass-reinforced polyamide or stainless steel housing
• no power supply needed
• for use in explosive areas

The hook-in radio load cell MFWZ was specifically developed to measure cable forces and hooked crane- / lift weighing applications. Even with compact dimensions and low weight, the device is highly accurate. With a robust design, the MFWZ is also suitable for rough environmental conditions.