Rough industrial work environments with

• vibrations
• sudden pressure changes or
• high purity demands

require a special protection mechanism for the pressure gauge movement with the needle pointer. The Manodamp® technology offers this solution.

The DX-EFSs high precision flowswitch from Ensim detects flow or no flow of water, lubricating oils, gases and aggressive media inside a pipe without the need of cooling the liquid:

• high precision
• easy assembly and adjustment
• explosion proof, CE certified
• relay circuit contactless with liquid
• low pressure drop

The blow off of exhaust steam vapor in the degassing process causes a continuous steam loss of 0.2-0.5%. This has always been an issue without a good solution in place.

The OxySteam Regulation System from Centec monitors and controls the steam exhaust by an Oxygen sensor and can be connected to an automated shut-off valve:

• savings up to 95% of steam loss
• easy installation, inbuilt valve control software
  
• ROI less than 1 year for 10ton+ boilers
• 3 months free testing with sensor return option

The Ensim DX-ELB explosion proof level switch is designed for alarm level control in pressure boilers and stringent liquid tanks. It provides a long-lasting measurement opportunity for point control in liquid tanks with high pressure or temperature.

• resistance to high temperature, up to 250°C
• up to 25 bar pressure
• for liquids and optionally granular fluids
• long lasting contact structure
• operations in vertical or horizontal connection

Bopp & Reuter Filling and Dosing Solutions for water-based media in the Beverage, Chemical and Pharmaceutical Industry:

• shortest filling time: < 0.1 second
• highest measuring accuracy: 0.01%
  
• lowest conductivity: >1µS/cm

Complete systems with flow meter, batch controller, valves and nozzles and flow computing operator terminal.

The DIMF liquid density meter from Bopp & Reuther is used for continuous measurement of the density/concentration of liquids or liquid mixtures:

• for hydrocarbons, highly aggressive chemicals, beverages, pastes, foams
• high accuracy (up to 0.01%) - custody transfer - long term stability
• tuning fork principle - robust design - maintenance free
• 400 point correction table for customized parameterization
• Output signals scalable for density and concentration, HART
• Ex protection: flameproof or intrinsically safe

The DIMF liquid density meter from Bopp & Reuther is used for continuous measurement of the density/concentration of liquids or liquid mixtures

• acids and bases (hydrochloric/sulphuric/nitric acid, sodium hydroxide, aromatic chlorine solution, ammonia, urea, chlorine, caustic soda,…)
• alcohol and solvents (ethanol, methanol, DMAC, methyl butanol, aceton, glycol, adblue, anti-freeze…)
• solids in liquids (porcelain, ketchup, fat in milk, sugar/Brix, water/starch, tartaric acid…)
• Density measurement (hydro carbons, bio fuel, air bubbles in water …)

The Ensim ELT vibrating switches used for level control with corrosive or viscous fluids, powders and solids.

Both tuning forks and single rods work reliable with sticky media.

The vibration sensitivity can be adjusted after installation.

The single rod version avoids jamming of granules.

Schmierer Germany introduces a special differential pressure gauge of the DGU series with a standard high pressure overload safety of 100 bar static pressure on each side with corrosion resistant Duratherm diaphragms for

• Flow measurement
• Filter testing
• Oil & Gas
• Chemical, OLEO chemical industries
• Shipping & offshore
• General process industries

The dydaqlog datalogger from Mueller Industrie Elektronik for

• flexible, adjustable input - for 16 different analog sensors
  
• reliable data recording with simple, intuitive setup and operation
• inbuilt webserver:no extra charge for webservice or software

The measured data are available anytime, anywhere in the Industrial Internet of Things IIoT.