Limatherm Mineral Insulated Thermocouple Sensors are
The SRU25 fully stainless steel pressure gauge is equiped with an inbuilt silicon jelly stabilizer movement for mechanical dampening against pressure spikes, vibrations, etc.
Hoentzsch in Germany developed a new Polymer vortex sensor for highly aggressive gases in the chemical industry, petrochemistry, semiconductor industry, electroplating and applications with halogenated gases which do not allow metallic material. The only parts contacting the medium are the sensor body made of high-performance polymer, the transducer made of aluminium oxide ceramics and seals made of fluororubber.
DP Orifice Plate Flowmeters from Kirchner Germany are manufactured with a wide variety of nominal widths for water, air, transparent and non-transparent liquids and gases and non-conductive fluids (mineral oils, demineralised water).
Ensim ECAP capacitive level transmitters measure
Full-empty calibration can be performed easily and safely. Different designs and materials for special industrial solutions. CE certified - explosion proof models available
Diaphragm pressure gauges with open measuring flange are especially well suited in rough conditions with viscous, crystallizing and mediums that carry solid particles. Diaphragm pressure gauges can be easily protected against overpressure.Schmierer Germany has introduced a specialized PTFE Xylan coated Diaphragm Seals for long-term protection against corrosion and chemicals in the Mineral Oil and Chemical Sector.
Limatherm Protection Tubes and Thermowells for
Limatherm provides fully explosion proof solutions for housing, sensors and protection tubes.
The Kirchner Flap Type Flow Meters are used for large flow rates in different types of process media: water, air, liquids, gases, non-conductive fluids (mineral oils, alkalis, acids), high viscous liquids (slurries) and fluids or liquids with a high content of solidifying particles.The primary measuring element of the flow meters is a flap, which is deflected by the flow of the medium. The deflection angle is a direct indication of the flow.
Advantages
The devices are used in water and waste water treatment plants, power stations, chemical and oleo-chemical factories, monitoring cooling and heating (furnace) systems, gravel extraction, etc.
KLA Type Flap Flowmeter
In the standard KLA version a magnet directly transfers the flap movement to an externally mounted pointer that indicates the flow quantity on a powder coated aluminium disk.
In the KLA-GS version the quantity is directly indicated by the flap. The flap-type flow meter is equipped with hard glass screens at the front and the back which provides a direct visual display.
KFS Type Flap Flowmeter
The 50 mm thick ring features a half-round plate that is fastened to a rotating spring-loaded spindle.
The angle between flap and ring changes according to the rate of flow, and a breakaway-proof magnetic coupling transfers the movement to an external pointer
Level control for solids and liquids in explosion proof environments in tanks, Ex and CE certified